Home >> Technology Overview >>TCP/IP/Ethernet
 

TCP/IP/Ethernet


Tibbo

EM500 BASIC-programmable Ethernet Module

GA1000 Wi-Fi SPI module

The EM500 is a miniature stand-alone BASIC-programmable embedded module, designed to be used in combination with a standard LED/magnetics RJ45 jack. The combined footprint of the EM500 and a standard jack is only 28.5x18.5mm.

The module's hardware mix, which includes 10/100BaseT Ethernet, a serial port, and 8 I/O lines, has been carefully tailored to address the basic needs of lightweight network-enabled control devices.

Compact dimensions, space-saving "vertical slice" mechanical design, low power consumption, and innovative dual-function LED control lines make the module an excellent fit for miniature, cost-sensitive designs.

More info...

GA1000 Wi-Fi SPI module

GA1000 Wi-Fi SPI module

The GA1000 Wi-Fi add-on module further expands the scope of potential applications for Tibbo BASIC-programmable modules by adding 802.11b/g communications capability to the already powerful hardware mix.
The GA1000 can be used with all T1000-based devices — the EM1000, EM1202, and EM1206.

More info...

EM203A Ethernet Module (Preferred Part)
(Serial-to-Ethernet Converter/ BASIC-programmable Controller*)

Member of the X20X family of devices. Features:

  • Compact dimensions (30.1x18.1x12.5mm).
  • One TTL serial port.
  • 10/100BaseT Ethernet port.
  • x4 LEDs onboard.
  • Can be used standalone or in combination with the RJ203A jack/magnetics module.

*Depends on loaded firmware.

More info...

RJ203A Jack/Magnetics Module (Preferred Part)

Member of the X20X family of devices. Features:

  • Compact dimensions (31.0x20.0x15.5mm).
  • 100/10BaseT magnetics.
  • RJ45 jack onboard.
  • Patent-pending design with minimized board footprint.
  • Can be used with DM9000A Ethernet Controller or EM203A Ethernet module.

More info...

 

EM203 Ethernet Module
(Serial-to-Ethernet Converter/ BASIC-programmable Controller*)

Member of the X20X family of devices. Features:

  • Low-profile, improved version of the EM203A device.
  • Compact dimensions (30.1x18.1x12.5mm).
  • One TTL serial port.
  • 10/100BaseT, auto-MDIX Ethernet port.
  • x4 LEDs onboard.
  • Can be used standalone or in combination with the RJ203 jack/magnetics module.

*Depends on loaded firmware.

More info...

 

RJ203 Jack/Magnetics Module

Member of the X20X family of devices. Features:

  • Compact dimensions (31.0x20.0x15.5mm).
  • 100/10BaseT magnetics.
  • RJ45 jack onboard.
  • Patent-pending design with minimized board footprint.
  • Can be used with DM9000B Ethernet Controller or EM203 Ethernet module.

More info...

 

DS1000 BASIC-programmable Industrial Controller

Third-generation external controller built exclusively for running applications written in Tibbo BASIC. Features:

  • Based on the EM1000 Module.
  • 10/100BaseT Ethernet port.
  • x4 high-speed RS232 ports.
  • Numerous status LEDs.
  • Extruded-profile aluminum body.
  • Fully waterproof -- IP68 certified*.
  • DIN rail mounting.

*When used with a properly installed secondary cover.

More info...

 

DS1206 BASIC-programmable Controller

DS1206 BASIC-programmable Controller

The DS1206 is a miniature BASIC-programmable controller designed primarily for serial-over-IP and serial control applications. It comes preloaded with a fully functional serial-over-IP application.
One unique feature of the DS1206 is its multi-channel serial port. The device has a single DB9M connector and is priced as a single-port device, yet packs four independent serial channels. In addition, it can power other devices or be powered in itself through the serial port.

More info...

 

DS203 Serial Device Server/ BASIC-programmable Controller

Second-generation external serial device server/ BASIC-programmable controller*. Features:

  • Very compact dimensions (60x47x30mm).
  • One RS232 serial port.
  • 10/100BaseT, auto-MDIX Ethernet port.
  • Wide 10-25V power supply range.

*Depends on loaded firmware.

More info...

 

DS100 Serial Device Server

Original first-generation external serial device server with RS232 or RS232/422/485 serial port*. Features:

  • Compact dimensions (89x51x30mm).
  • One RS232 serial port ('R' version).
  • One RS232/422/485 serial port ('B' version)*.
  • One 10BaseT Ethernet port.
  • Internally based on the EM100 module.

* Available through a single DB9M connector, mode selection by DIP switch.

More info...

 

EM1206 BASIC-programmable Ethernet Module

EM1206 BASIC-programmable Ethernet Module

When combined with the RJ203 jack/magnetics, the EM1206 occupies only 34.5x19 mm of board space. Alternatively, the EM1206 can be used with any suitable magnetics and jack.
The module's hardware mix, which includes 100Base/T Ethernet, four serial ports, flash disk, EEPROM, and RTC, has been carefully tailored to address the typical needs of network-enabled control applications.

More info...

EM1202-EV BASIC-programmable Ethernet Board

Third-generation BASIC-programmable Ethernet board for internal use. Features:

  • EM1202 Ethernet module onboard.
  • Choice of RS232 or TTL serial port*.
  • 10/100BaseT Ethernet port.
  • Two power options: 10-25V or 3.3V*.
  • Internally based on the EM1202/RJ1202 devices.
  • Compact PCB dimensions (52.6x38mm).

* Depends on the board version; two different versions are available.

More info...

 

EM1202 BASIC-programmable Ethernet Module
RJ1202 Companion Ethernet Connector Module

The EM1202 is a third-generation Tibbo Ethernet module built exclusively for running applications written in Tibbo BASIC. Features:

  • Very compact dimensions (19x17x14mm).
  • 50 MIPS purpose-built CPU.
  • 10/100BaseT Ethernet port.
  • x4 high-speed TTL serial ports.
  • 512/1024K onboard flash disk.
  • x32 general-purpose I/O lines.

The RJ1202 is an optional connector module, that can be used with the EM1202 or any other Tibbo module (exclusing EM202). Features:

  • Very compact dimensions (19x32.5x15.5mm).
  • Standard RJ45 Ethernet connector socket.
  • Built-in 10/100BaseT Ethernet magnetics.
  • x4 Status LEDs.
  • Face dimensions match those of the EM202.

More info...

 

EM1000 BASIC-programmable Ethernet Module

Third-generation Tibbo Ethernet module built exclusively for running applications written in Tibbo BASIC. Features:

  • Compact dimensions (38.4x28.4x5.5mm).
  • 50 MIPS purpose-built CPU.
  • 10/100BaseT Ethernet port.
  • x4 high-speed TTL serial ports.
  • 512/1024K onboard flash disk.
  • Real-time clock with backup power.
  • SPI port for future extensions.
  • x49 general-purpose I/O lines.

More info...

 

WA1000 Wi-Fi SPI module

The WA1000 Wi-Fi module is used together with the EM1000 BASIC-programmable embedded module. Features:

  • Implements 802.11b interface*.
  • Compact dimensions (37.0 x 25.0 mm).
  • Chip antenna onboard, coaxial connector for external antenna.
  • Fully supported by the Wi-Fi (wln.) object of the EM1000W programming platform.

* 802.11g version of the module is under development.

More info...

 

EM200 Ethernet Module
(Serial-to-Ethernet Converter/ BASIC-programmable Controller)

Second-generation serial-to-Ethernet converter/ BASIC-programmable controller module*. Features:

  • One TTL serial port.
  • Very compact dimensions (32.1x18.5x7.3mm). 10/100BaseT Ethernet port.
  • x5 additional I/O lines.
  • x4 LED control lines.
  • Fully sealed enclosure.

*Depends on loaded firmware.

More info...

 

EM120 Serial-to-Ethernet Module

Second-generation serial-to-Ethernet converter module. Features:

  • Low power consumption (50mA@5V ).
  • One TTL serial port.
  • One 10BaseT Ethernet port.
  • x5 additional I/O lines.
  • x4 LED control lines.
  • Fully sealed enclosure.

More info...

 

EM100 Serial-to-Ethernet Module

Original first-generation serial-to-Ethernet converter module. Features:

  • Low power consumption (40mA@5V ).
  • One TTL serial port.
  • One 10BaseT Ethernet port.
  • x2 additional I/O lines.
  • x4 LED control lines.
  • Fully sealed enclosure.

More info...

 

 

 
 
 
 
Telephone : +44 (0)1945 47 52 16
 
 
     
   
S1306-2356-WB01 (10.22.4.54)